Novatel USB730L - At$Nwthermtemp

USB730L AT Command Reference Guide 50
AT$NWTHERMTEMP
Command
AT$NWTHERMTEMP
Command Function
Reports the temperature in raw ADC uV and deg C of the sensor ID set with
the write operation. If not specified, the sensor ID defaults to 0,
PA_THERM.
Query Syntax
AT$NWTHERMTEMP=?
Query Response
NWTHERMTEMP: 0 (PA_THERM)
Write Syntax
AT$NWTHERMTEMP=<therm>
Write Response
at$nwthermtemp=0
$NWTHERMTEMP: Sensor set to 0 [PA_THERM]
Read Syntax
AT$NWTHERMTEMP?
Read Response
NWTHERMTEMP: PA_THERM 492028 uV, 47 deg C
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
— <therm>
0 - PA_THERM
1 - MSM_THERM
2 - BATT_THERM
Notes
Examples