Novatel USB730L - At+Cmee

USB730L AT Command Reference Guide 84
AT+CMEE
Command
AT+CMEE
Command Function
Reports the Mobile Termination Error for Command Support Check and for
the query existing mobile termination state.
Query Syntax
AT+CMEE=?
Query Response
+CMEE: (0,1,2)
Write Syntax
AT+CMEE=<n>
Write Response
OK
Read Syntax
AT+CMEE?
Read Response
2
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
— <n>
0 - disable +CME Error
1 - enable +CME Error – use numeric value
2 - enable +CME Error – use verbose value
Notes
Examples