Novatel USB730L - At+Cgpiaf

USB730L AT Command Reference Guide 74
AT+CGPIAF
Command
AT+CGPIAF
Command Function
Reads IP Address Format, determines what format to print IPV6 address
parameters of other AT commands, and reports Mobile Termination Error-
Change result code to numeric value.
Query Syntax
AT+CGPIAF=?
Query Response
+CGPIAF: (0-1),(0-1),(0-1),(0-1)
Write Syntax
AT+CGPIAF=[<IPv6_AddressFormat>[,<IPv6_SubnetNotation>[,<IPv6_
LeadingZeros>[,<IPv6_CompressZeros>]]]]
Write Response
OK
Read Syntax
AT+CGPIAF?
Read Response
+CGPIAF: 0,0,0,0
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
Notes
Examples