Novatel USB730L - AT Command Syntax and Parameters

USB730L AT Command Reference Guide 9
AT Command Format
The following is the format in which all commands will be presented.
Command Function
(Description of the command function)
Query Syntax
ATx=?
Query Response
ATx: (parameter1 name 1 – 15), (parameter2 name 1-10),…
Write Syntax
ATx=<value>,<value>[,<optional value>],…
Write Response
OK or ERROR
Read Syntax
ATx?
Read Response
<value>,<value>,…
Execute Syntax
ATx
Execute Response
OK, ERROR, or <value>
Unsolicited Response
Parameter Values
<Value 1>
ATx: (1-15),(1-10)
<Value 2>
Notes
(Additional command notes)
Examples
NOTE: Where applicable, the <value> responses provided for the READ and EXECUTE formats
are modem default values. All efforts will be made by Novatel Wireless. to keep these values current
in the documentation but will not be responsible for any differences that may occur as a result
subsequent software builds and version enhancements.
WARNING! Do not use tab characters in the custom AT command scripts.