Novatel USB730L - At+Cfun

USB730L AT Command Reference Guide 63
AT+CFUN
Command
AT+CFUN
Command Function
Reads and sets Phone Functionality and integer range support.
Query Syntax
AT+CFUN=?
Query Response
+CFUN: (0-1,4-7),(0-1)
Write Syntax
AT+CFUN=<fun>, <rst>
Write Response
OK
Read Syntax
AT+CFUN?
Read Response
+CFUN: 1
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
— <fun>
Phone Functionality:
0 - minimum functionality 1 - normal functionality
4 - disable phone both transmit and receive RF circuits 5 - factory test
mode
6 - reset UE
7 - offline mode
All other values below 128 are reserved.
— <rst>
Integer range support:
0 - do not reset the MT before setting it to <fun> power level, this is default
value
1 - reset the MT before setting it to <fun> power level
Notes
Examples