Novatel USB730L - At+Cmec

USB730L AT Command Reference Guide 83
AT+CMEC
Command
AT+CMEC
Command Function
Reads the Mobile Termination Control Mode.
Query Syntax
AT+CMEC=?
Query Response
+CMEC: (0-2),(0),(0),(0-2)
Write Syntax
AT+CMEC=[<keyp> [,<disp> [,<ind> [,<tscrn>]]]
Write Response
+CMEC: OK
Read Syntax
AT+CMEC?
Read Response
?
<keyp>, <disp>, <ind>, <tscrn>
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
— <keyp>
(Integer type)
0 - device can be operated only through its keypad 1 - device can be
operated only from TE
2 - device can be operated from both MT keypad and TE
— <disp>
(Integer value) 0
— <ind>
(Integer value) 0
— <tscrn>
(Integer type)
0 - only the device can set the status of its indicators
1 - only TE can set the status of the device indicators
2 - device indicators can be set by both the deviceand TE
Notes
Examples