—39—
G
Maintenance
Inspection Items
G1
G3
Inspection Task Every Cycle Every 100 Cycles Every 1000 Cycles
Inspect press connector bolt condition and replace if condition is
degraded.
X
Inspect platen condition and clean (G2) or replace as needed. X
Inspect extrusion and head plates for any signs of fatigue. X
Inspect power connector pins for signs of arcing or wear. X
How to Clean the Platens
To clean the top and bottom platens, place an all-purpose cleaner on a clean cloth and wipe platens.
For area requiring further cleaning use a nylon abrasive pad.
G2
Item Code Ordering Number Description
08650 AERO-COMPRESSOR-SMALL Compressor 625-1225
08645 AERO-COMPRESSOR-LARGE Compressor 1525-2135
08525 AERO-FILTER-COMPRESSOR-LRG Compressor air filter
09249 SPRING-BAFFLE-AERO-G3-625 Spring baffle for 625
09250 SPRING-BAFFLE-AERO-G3-925 Spring baffle for 925
09251 SPRING-BAFFLE-AERO-G3-1225 Spring baffle for 1225
09252 SPRING-BAFFLE-AERO-G3-1525 Spring baffle for 1525
09253 SPRING-BAFFLE-AERO-G3-1835 Spring baffle for 1835
09254 SPRING-BAFFLE-AERO-G3-2135 Spring baffle for 2135
08604 AMIGO-FRICTION-TAPE-33X25 Tape for clamp bars
09262 BOLT-CLAMP-TOGGLE-AERO-G3 Press connector bolt
09342 T/C-SUBASSY-AERO-G3 Thermocouple
09343 FUSE-ASSY-THERMAL-AERO-G3 Thermofuse
09351 FUSE-ASSY-CERAM-FL-0326020.MSP Main power fuse 625-1225
09374 CARTRIDGE-FUSE-F-20A-RS-3375256 Main power fuse 1525-2135
08700 AERO-FUSE-CERAMIC-4A Power supply fuse/Large compressor fuse 1525-2135
Spare Parts List
Contact Flexco’s Customer Service if other parts are required: www.exco.com.
To Next Page
Loading...