Novy Easy - 9.2 Messages at the extraction; 9.3 Miscellaneous; OVERVIEW OF THE FUNCTIONS NOVY EASY

Extraction control
On/off button for the extractor
Extractor indication and selection button
Zone for slider controls
Timer time indicator
Timer buttons
Lock key
Hob control
On/off control key for the hob
Indication of the timer time
Timer control keys
Stop & Go control key
Power level indication
u
Flexzone indicator
Timer indicator
Keep warm function key
Grill function
Zone for slider control
Lock key
OVERVIEW OF THE FUNCTIONS NOVY EASY
Switch hob on/off
ON -
Press and hold for 2 seconds. LED will light up.
OFF -
Press . LED goes out.
Set the power control
MORE - glide your nger over the slider (Power Control)
LESS - glide your nger over the slider to 0
Switching Power on and off
ON - Glide your nger over the slider to the end - [P]
OFF- Glide your nger over the slider [0-9]
Power limit activated
[ 9 ] will be reduced to [8] and ashes [8]
Stop & Go function
ON - Press I I
OFF - Press I I
Select the timer
Press
above the zone selection key.
Reduce the time
press [–] on the timer
Increase the time
press [+] on the timer
Switch off the timer function
Press
above the zone selection key.
Keep pressing [–] on the timer until the timer is at 0
Using the timer without cooking
Switch on the hob. Press
above the zone selection key.
Set the time with [–] or [+].
Programming auto heat up
ON - Glide your nger over the slider, continue pressing on the desired
power for 3 seconds
OFF - Glide your nger over the slider
Keep warm function
IN - Press
OFF - Press
Operate flexzone manually
ON - Press the 2 zone selection keys at the same time
OFF - Press the 2 zone selection keys at the same time
Operate flexzone automatically
ON - Place a pan on the front and rear zone
OFF - Press the 2 zone selection keys
Grill function
ON - Press
Off - Press
Set extraction power regulator
HIGHER - Slide over the “SLIDER”
LOWER - Slide to 0 over the “SLIDER”
Automatic extraction power regulator
ON - Press the zone selection button of the extractor and keep
pressed for 3 seconds
OFF - Press the zone selection button of the extractor and keep
pressed for 3 seconds