To Next PageTo Next Page
Need help?Do you have a question about the NPK GH3 and is the answer not in the manual?
Warning about flying debris and required protective measures during operation.
Caution against using torches for tool sharpening, recommending grinding.
Pre-use checks for new, rebuilt, or inactive hammers, including nitrogen gas pressure.
General safety guidelines and warnings to ensure safe hammer operation.
How to preload the tool, apply force, and avoid blank hammering.
Importance of aligning force with tool penetration for efficient demolition.
Prohibitions on prying, continuous hammering, and working face.
Warnings against dropping, using for lifting, and operating cylinders at end of stroke.
Procedures and specifications for measuring and setting nitrogen gas pressure.
Step-by-step guide to measure nitrogen gas pressure using a gauge.
Step-by-step guide to charge the hammer with nitrogen gas.
Step-by-step guide to safely release nitrogen gas pressure from the hammer.
General
