To Next PageTo Next Page
Need help?Do you have a question about the NPK GH2 and is the answer not in the manual?
Details specific safety measures for operating the hammer, including prohibitions.
Manual greasing steps for hammers without an autolube system.
Explains the importance of correct grease and how to determine greasing intervals.
Essential safety guidelines for operating the hydraulic hammer.
Covers tool preload, downforce application, and avoiding blank hammering.
Explains the importance of aligning force direction with tool penetration.
Warns against using the hammer as a pry bar or in one position for too long.
Details tool lubrication and checking for tool and bushing wear.
Explains gas pressure requirements and the necessary adapter.
Step-by-step guide to measure the nitrogen gas pressure.
How to compare measured pressure with specifications and proceed.
Step-by-step guide to charge the hammer with nitrogen gas.
Step-by-step guide to discharge the nitrogen gas pressure.
Further details on the gas discharge process.
General
