- 44 -
STORAGE OF HYDRAULIC HAMMER
For short term storage between jobs, place the hammer horizontal on wood blocks
(t20). Be sure the tool is liberally greased and the hydraulic hoses are capped (AO).
Cover with a waterproof tarp (t21), not shown.
If the NPK HYDRAULIC HAMMER is not to be used for a long period of time (months),
it is recommended the gas pressure be discharged (M). The tool (HH) should be
removed, and the piston pushed all the way in. Be sure the hydraulic hoses are
plugged and grease the exposed end of the piston (N). Grease and reinstall the tool.
Cover with a waterproof tarp (t21), not shown.
To Next Page
Loading...
