- 5 -
CARRIER MACHINE COMPATIBILITY
These carrier weight ranges are intended as a guideline only. Other factors, such as
stick length, counterweights, undercarriage, etc., must be taken into consideration.
Mounting a HAMMER that is too heavy for the carrier machine
can be dangerous and damage the machine. Verify carrier
stability with hammer before transport or operation.
Mounting a HAMMER that is too small for the carrier machine can damage the
HAMMER, cause tool breakage and void Warranties. Please consult NPK Engineering
for specific detailed information.
CARRIER WEIGHT lbs. (kg)
HAMMER MOUNTING RECOMMENDED RANGE
MODEL STYLE (lb) (kg)
GH06 Excavator 2,200 – 4,400 1,000 – 2,000
Skid Steer 2,400 – 3,500 1,100 – 1,600
GH07 Excavator 2,800 – 5,500 1,300 – 2,500
Skid Steer 3,000 – 5,500 1,350 – 2,500
GH1 Excavator 5,400 – 9,000 2,450 – 4,100
Skid Steer 5,000 – 7,500 2,300 – 3,400
GH2 / GHS2 Excavator 6,600 – 12,000 3,000 – 5,500
Skid Steer 6,000 – 9,000 2,700 – 4,100
GH3 Excavator 8,800 – 15,000 4,000 – 7,000
Skid Steer 8,000 – 14,000 3,600 – 6,400
GH4 Excavator 13,000 – 22,000 6,000 – 10,000
GH6 Excavator 22,000 – 31,000 10,000 – 14,000
*Specifications are subject to change without notice.
To Next Page
Loading...
