To Next PageTo Next Page
Need help?Do you have a question about the NPK GH6 and is the answer not in the manual?
Explains DANGER, WARNING, CAUTION, ATTENTION symbols used in manuals.
Warns about flying debris and dangers of torching/welding tool points.
Covers pre-use checks for new, rebuilt, or inactive hammers, including gas pressure.
Essential safety rules, including cab protection and avoiding hoist use.
Lists actions to avoid, such as using as a pry bar or prolonged hammering in one spot.
Warnings against dropping, moving objects, and cylinder end-stroke operation.
Explains preferred/alternate methods and pre-charge pressure values for nitrogen gas.
Describes the specific adapter needed for certain NPK hammer models.
Lists parts included in the gas charging kit and necessary precautions.
Step-by-step guide on how to measure the nitrogen gas pressure in the hammer.
Continues the procedure for checking gas pressure and comparing it to specifications.
Step-by-step instructions for charging the hammer with nitrogen gas.
Step-by-step guide for safely releasing nitrogen gas pressure from the hammer.
Continues the procedure for discharging gas pressure and removing adapters.
General
