Need help?Do you have a question about the NSK iClave Plus and is the answer not in the manual?
General| Brand | NSK |
|---|---|
| Model | iClave Plus |
| Category | Steriliser |
| Language | English |
Overview of the manual's purpose and user responsibilities.
Details compliance with EN13060 and Medical Device Directive 93/42/CEE.
Specifies the external dimensions and total weight of the unit.
Instructions on how to carefully remove the sterilizer from its packaging.
Provides detailed physical measurements of the sterilizer unit.
Details the internal chamber dimensions, capacity, and tray sizes.
Outlines the various safety devices and protections integrated into the sterilizer.
Lists essential safety precautions and risk warnings for operating the sterilizer.
Illustrates the front and rear panels with key components labeled.
Lists and shows images of the accessories included with the sterilizer.
Presents detailed technical data, performance parameters, and electrical requirements.
Covers essential electrical, environmental, and placement requirements for installation.
Explains the control panel's keys, displays, indicators, and symbols.
Details how to connect a USB stick for cycle reports and data management.
Guides through the process of selecting and starting various sterilization cycles.
Instructions on how to safely interrupt or stop an ongoing sterilization cycle.
Procedures for filling the fresh water tank and emptying the waste water tank.
Describes how to access and configure settings like time, special cycles, and energy modes.
Details the procedure for performing the automatic cleaning cycle.
Emphasizes the importance of cleaning instruments prior to sterilization.
Step-by-step guide for cleaning or replacing the water inlet filter.
Explains the necessity and procedures for performing sterility tests like B&D and Vacuum.
Describes the automatic self-test performed upon equipment startup.
Details the conductivity check for demineralized water quality.
Introduces the alarm system and classification of anomalies.
Lists common warning messages, their causes, and solutions.
Instructions for connecting the sterilizer to an external printer.
Details connection to PC for service, diagnostics, and remote support.
Details the service book and periodic maintenance checks required.
To Next Page