EasyManua.ls Logo

NSK iClave Plus - CONNECTION TO A COMPUTER

NSK iClave Plus
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
9.2 CONNECTION TO A COMPUTER
(ONLY FOR SERVICE AND FUTURE APPLICATIONS)
The serial port can be also used for the connection to an external PC. This function is only available for Ser-
vice technician, and allows to perform more accurate tests as well as a new approach to the service and cer-
tification aspect.
By a special SW tool, the Service technician is able to detect any significant data of the machine, and to per-
form more quickly and cheaply both troubleshooting and repairing.
Moreover, the system allows the connection (via external modem) to
an authorized Service Center in order to perform a remote check-up and a periodic certification of the effec-
tive operation of the sterilizer.
Do not connect devices not supported by the manufacturer.
THE RJ45 CONNECTOR IS NOT DESIGNED FOR A LAN CONNECTION, THIS OPERATION
WILL DESTROY THE MOST OF THE ELECTRONIC PART OF THE AUTOCLAVE.