NSK Primado 2 User Manual

12
This can be done in three ways: by the Motor with Hand Control, the Primado2 Wire Pin Driver or the Foot Control.
4
Operation

The Motor with Hand Control and the Primado2 Wire Pin Driver can also be operated by the Foot Control. Connect it with the Foot Control
and depress the Pedal. The Motor will work in the normal mode of the Foot Control, regardless of the Hand Control.

If operating the Motor only with the Motor with Hand Control and the Primado2 Wire Pin Driver, it is recommended to disconnect the Foot
Control from the Control Unit. Alternatively, set the Foot Control to OFF by the Foot Control ON/OFF Button (to disable the Foot Control).

Refer to the Operation Manuals of Primado2 and Attachments/Handpieces.

The Hand Switch of the Motor with Hand Control and the Pedal of the Foot Control are variable. The rotational speed increases/
decreases within the preset rotation range, depending on the extent/duration of depressing.
CAUTION

NSK Primado 2 Specifications

General

Brand	NSK
Model	Primado 2
Category	Engine
Language	English