NSK Primado 2 User Manual

13
When using the Motor with Hand Control
1) Confirm that the Safety Lock of the Hand Control is OFF.
2) Slide the Adjustable Lever to the desired length.
3) Hold the Hand Switch and slide the Safety Lock to ON (Fig. 6).
4) Depress the Hand Switch to start the Motor. When the Hand Switch is depressed or released, there
is a short alarm sound.
When the Reverse Mode has been selected, the Bur rotates in reverse. During the reverse rotation in
this Mode, the alarm continues to sound.
OFF
ON
Fig. 6

When operating the Safety Lock, be sure to hold the lever with your finger. If operating it without holding the lever, the lever might
inadvertently be depressed when the Safety Lock is being turned ON/OFF, thereby triggering a rotation of the Motor. This might cause an
accident.
CAUTION
Adjustable Lever
Safety Lock

NSK Primado 2 Specifications

General

Brand	NSK
Model	Primado 2
Category	Engine
Language	English