2
CAUTION
· Do not wipe with, or clean or immerse in, high acid water or sterilizing solutions.
· Perform periodical maintenance check.
· Do not overpressure to the handpiece and treatment area.
M15L/M15,M25L/M25
Never perform PMTC (operation to give heavy torque by a low speed rotation) which it used rubber cap or brush. It may reason
for the malfunction or stop rotation by less torque. Special Reduction Contra Angle Handpiece is required for the PMTC.
However, if the micromotor has a function for the root canal explanation, you can perform it.
M95L/M95
· Do not use long surgical burs. Do not use burs longer than 26mm.
· Entering foreign object into gear or inside of handpiece head may cause burn injury.
· Wear protection glass and dust mask for your health and safety.
· Depressing the push-button while the handpiece is rotating will result in OVERHEATING of the handpiece head. Special
caution must be exercised during use to keep cheek tissue AWAY from the push-button of the handpiece. Contact with cheek
tissue may cause the push-button to depress and burn injury to the patient may occur.
· Even if it does irrigation during operation, bearing is worn and it may overheat or noise. Ask repair for your dealer.
To Next Page
Loading...
Need help?
General
