NSK Surgic Pro2 Quick Operation Guide

Surgic Pro2 Quick Operation Guide
Control panel
Preparation for Use
Starting operation
Connect the AC
power cord.
Remove the battery cover
from the foot control.
Insert three AAA
batteries.
Attach the battery cover.
Install the foot
control hanger.
Mount the coolant
solution hanger post.
Turn the pump cover
clockwise 180°.
Turn on the power of
Surgic Pro2 and each
paired device.
The above is displayed. The normal screen is displayed.
Make sure that each device is connected.
Insert the irrigation
tube.
Turn the pump cover
counterclockwise 180°.
Insert the irrigation tube into a pack. Connect the motor
cord.
Connect the handpiece. Attach the
irrigation nozzle.
Attach the tube
holders.
To
“Starting
operation”
A
B
C
D
E
F
G
H
Rotation speed
Torque
Program No.
Gear ratio
Implant system No.
Rotation direction
Coolant solution flow level
Light level
I
M
Battery level of the foot control
Current operating torque level
Status of connection between
VarioSurg 3 and Osseo 100+
Status of connection between
an external terminal and the
control unit
Status of connection between
the foot control
J
K
L
Ready for
operation
For details, see the operation manual.
700 Shimohinata, Kanuma, Tochigi 322
-
8666, Japan
Foot control
Change coolant
solution flow
Change program
Change motor
direction
Speed control
pedal
OM-DE0939EN 000
LINK Key
SETTING Key
ENTER Key
CANCEL Key
SPEED Key
TORQUE Key
PROGRAM Key
MEMORY KeyGEAR Key
FWD/REV KeyCALIBRATION Key
LIGHT KeyCOOLANT Key
IH J K L E D C
BAMGF

NSK Surgic Pro2 Specifications

General

Brand	NSK
Model	Surgic Pro2
Category	Dental equipment
Language	English