NSK Ti-Max X10L - Post-Use Maintenance

9
EN DE FR ES IT PT
7. Post-use Maintenance
After each patient maintain the product as follows.
WARNING
•Immediatelyafteratreatment,thehandpieceshouldbecleaned,lubricatedandsterilized.Failuretoproperly
maintainthehandpiecemayleadtooverheating,causingburninjuriesorproductfailure.
CAUTION
• Do not use the following fluids to wipe, immerse or clean the product; strong/super acid water, strong acid/alkaline chemicals, chlorine-
containing solutions, solvents such as benzine or thinner.
7-1 Preparation
1) Wear eye protection, a mask and gloves to avoid infection.
2) Remove the bur.
3) Disconnect the handpiece from the motor.
CAUTION
• To avoid injury, keep your hands away from the bur during rotation.