NSK Ti-Max Z Series - Page 6

5
EN DE FR ES IT PT
WARNING
CAUTION
4. Setting of Air & Water Supply Pressure
Measure the supply pressure at the handpiece/hose connection point and set the pressure to the value
specified on the specification table (Fig. 1).
For NSK Multi Gauge information refer to Option Parts List.
Ř Do not exceed the optimum pressure specified on the specification table.
Ř Do not use air contaminated by dust, moisture or oil.
Fig. 1
Handpiece
Chip Air
Pressure
Exhaust Air
Pressure
Water
Pressure
Drive Air
Pressure