User’s documentation set
The following manuals are included into the user’s documentation set:
- Instruction Manual – is the guidance on preparation of the instrument and other
equipment for operation on various techniques of Scanning Probe Microscopy. The
contents of the user’s documentation set may differ depending on the delivery set of the
instrument.
- SPM Software Reference Manual – is the description of the control program
interface functions, all commands and functions of the menu and, also a description of
the Image Analysis module and the Macro Language “Nova PowerScript”.
- Control Electronics. Reference Manual – is the guide to SPM controller,
Thermocontroller and Signal Access module.
Some e
quipment, which is described in the manuals, may not be included into your
delivery set. Read the specification of your contract for more information.
The manuals are updated regularly. Their latest versions can be found in the site of the
company (
http://www.ntmdt-si.com/support).
To Next Page
Loading...