EasyManua.ls Logo

NUK Flash - 1 Description; Intended Use

NUK Flash
112 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
- 27 -
6.2 Changing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
6.3 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
7. Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
8. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
8.1 Production date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
9. Guidance and manufacturer's declaration . . . . . . . . . . . . . . . 46
9.1 Electromagnetic emissions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
9.2 Electromagnetic immunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
9.3 Recommended separation distances. . . . . . . . . . . . . . . . . . . . . . . 50
10. Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
10.1 Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
10.2 Disposable/rechargeable batteries. . . . . . . . . . . . . . . . . . . . . . . . . 52
10.3 Packaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
11. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
11.1 Service Centres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
11.2 Supplier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
12. EU declaration of confirmity. . . . . . . . . . . . . . . . . . . . . . . . . . . 54
1. Description
1.1 Intended use
The infrared forehead thermometer NUK
Thermometer Flash can measure the
infrared heat generated by the forehead to
reflect patient’s body temperature
accurately.
The room temperature is shown on the
display when it is idle.
Temperatures of surfaces can be simply
and reliably measured.
This product should only be used in dry
rooms. It must not be used out in the open
or in humid rooms.

Table of Contents