MEGAWATT CARBON BIKE MANUAL | 1 3
3. Loosen presta value nut and push to deflate the inner
tube.
4. When the tube is deflated, remove the nut holding the
valve in place.
5. Unseat tyre by pushing the bead to the centre of the
rim. Do this on both sides of the tyre
6. Remove one side of the tyre by taking the bead over
the rim.
7. Push the valve through the rim and remove the inner
tube.
8. Get your tubeless valve and get it ready to install. At
this point also double check that the tubeless tape is still
correctly stuck down and not damaged. If it has been
damaged the rim will need retaped.
To Next Page
Loading...
