MEGAWATT CARBON BIKE MANUAL | 1 9
SECTION 3 - POWERTRAIN QUICK START GUIDES
SWITCHING ON YOUR MEGAWATT CARBON FOR THE FIRST TIME
Before you turn on your Megawatt Carbon for the first time you will need to fully charge the battery to wake it from sleep
mode. Full charge takes approximately 5 hours for the supplied 720Wh battery.
PLEASE NOTE
Use only the SRAM manufactured charger and charger cord to charge the battery. Use of a 3rd party chargers and cords may
cause the battery to overheat, reduce its service life, catch fire, or explode.
1. If you have a power source accessible to the bike,
simply plug your SRAM Powertrain Charger into the power
socket and turn on.
2. Now plug the Powertrain Charger into the charging port
found on the seat tube.
3. To check the battery is charging, the Bridge Display will
indicate the % charge. It will take approximately 5 hours
for a full battery charge.
To Next Page
Loading...
