What to do if my Numark AXIS 9 CD Player has no sound?
If you're not getting any sound from your Numark CD Player, there might be a couple of things to check. First, make sure your output cables are correctly connected. Also, verify that your amplifier is properly set up.
Why does the sound skip on my Numark AXIS 9?
Sound skipping on your Numark CD Player can be caused by a couple of things. It could be that the CD player is experiencing vibrations or physical shock, so try changing its location. Alternatively, the disc might be dirty, so give it a clean.
What to do if disc play does not start on Numark AXIS 9?
If your Numark CD Player isn't starting disc play, there are a couple of possible reasons. First, check that the disc is loaded with the label side up. If it is, the disc might be too dirty, so try cleaning it.
How to fix Numark AXIS 9 if it doesn't turn on?
If your Numark CD Player isn't powering on, ensure the power plug is firmly inserted into the AC outlet. Also, check that the IEC power cord is securely connected to the rear of the unit.
Why is my Numark AXIS 9 humming?
A humming sound from your Numark CD Player could be due to loose cable connections. Ensure that all audio plugs are firmly connected.
To Next Page
General
