CDN25
- The Leader in DJ Technology
©2001 Numark Industries
- 9 -
http://www.numark.com
DISPLAY FEATURES
1. CUE - Flashing when the unit is setting a cue point. Lit continuously when the unit is
paused at a cue point.
2. PAUSE (II)- Active when the unit is paused.
3. PLAY (>)- Active while the unit is actually playing a CD.
4. TRACK - Shows the track that the unit is playing.
5. TOTAL – indicates when total CD remaining tracks are displayed.
6. MINUTES - Shows the minutes elapsed or remaining depending on mode setting.
7. SECONDS - Shows the seconds elapsed or remaining depending on mode setting.
8. FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This
shows the frames elapsed or remaining depending on mode setting.
9. SEARCH – indicates when the unit is searching through the music
10. CONTINUOUS PLAY – Shows when the unit is set to play back the entire CD without
stopping between tracks.
11. SINGLE PLAY- Shows when the unit is set to play just one track at a time.
12. CD IN – indicates a standard CD is in the unit.
13. TIME BAR - Shows either track elapsed time, remaining track time, or remaining total time
depending on the setting of the “time” button.
TIME MODE -
14. (Remain) indicates when track remain time is displayed.
15. (Total) indicates when total CD remain time is displayed
note: if both indications will not be lit when the unit is showing “elapsed” time
16. PITCH DISPLAY – indicating current pitch
To Next Page
Loading...
