Numatic CRG 8055/100T User Manual

10
www.numatic.co.uk
Note: After the Emergency Stop button has been pressed the Traction LED will ash 7 times, pause and repeat until the
Emergency Stop button has been reset and the machine switched o󰀨 / on.
The CRG 8055/8072 is equipped with an
Anti-tip system.
The machine automatically slows down
preventing the machine from tipping over if
cornering at speed.
The bu󰀨ers at the front are designed to
prevent the machine tipping in the event of
the operator turning sharply.
The bu󰀨ers are designed to be
replaceable when worn.
Machine Operation
Emergency Stop Button / Horn
Anti-tip System
Set desired traction speed as required, depending on oor type
and level of soiling.
Once the Max speed has been set using the control knob on the
control panel,
ne adjustments can be made using the variable control speed
pedal located on the right side of the footplate.
Maximum Speed Control
Care must be taken to reduce speed when cornering or manoeuvring.
!!
In an emergency, strike the emergency
stop to disable the machine.
Horn button - for sounding a warning signal
O
P
T
I
M
U
M
F
L
O
O
R
C
L
E
A
N
I
N
G
T
R
A
N
S
I
T
S
P
E
E
D

Numatic CRG 8055/100T Specifications

General

Brand	Numatic
Model	CRG 8055/100T
Category	Dryer
Language	English