Numatic CRG 8055/100T User Manual

7
T 01460 68600
When tting the brushes make sure it is done on a smooth surface.
Please follow the same process to t both brushes to the CRG 8072 as is for the
single brush tting on the CRG 8055.
To disengage the brush, remove manually.
Note: Do not lift the brush deck until the brush has stopped revolving or the
brush will release.
Make sure you raise the brush deck before driving to the cleaning site.
Safety Gloves are recommended for the changing of used brushes.
When in transit, the oor tool can be placed on the bracket at the rear of the machine.
Simply slot the retaining knob into the bracket.
Machine Set-up Guide
Always ensure that the machine is switched o󰀨 before making any adjustments.
!!
10
11
12
Raise Brush Deck / Fitting the Brush / Lower Brush Deck
Floor Tool Transit Bracket
Raise brush deck. Brush deck raised position. Slide brush under machine.
Brush in place. Lower brush deck. Brush deck lowered.
Press and hold brush engage button.
Switch machine on. Machine has picked up the brush.
CRG 8072
Twin Brush

Numatic CRG 8055/100T Specifications

General

Brand	Numatic
Model	CRG 8055/100T
Category	Dryer
Language	English