Leg Rest Use
The fully adjustable leg rest can be used in all three
modes of the child restraint, and it serves as both
a safety and a comfort feature. The leg rest can be
angled to achieve proper leg support and extended
for longer legs.
Rear Facing
In this mode, the leg rest not only provides increased
leg room, but also serves as an anti-rebound panel,
which aids in achieving proper installation tightness.
1 - In rear facing mode, the leg rest MUST be
in the upright position. The angle of the leg rest
should match the angle of the vehicle seat back.
Forward Facing or as a Booster
In these modes, the leg rest provides leg support
and protects your vehicle seat from dirty shoes.
To Adjust Leg Rest:
2 - Push and hold the buttons on both sides of the
leg rest. You can now angle and extend the leg
rest simultaneously.
3 - Adjust the leg rest to the desired position by
tilting to rotate the angle (1) and pulling forward
to extend for a child with longer legs (2).
Once you reach the desired position, release the
buttons. You will hear them click as they spring
back into place, locking the leg rest.
If the buttons do not spring back right away, gently
tilt the leg rest until it locks into place. Angle must
be locked before extension can be locked.
2
1
2
3
32 EXEC
™
instructions 33EXEC
™
instructions
1