Nuna mixx Series User Manual

Storage Basket
1 - Wrap the basket flap around the rear frame and
fasten the 3 snaps under the basket.
2 - To access the storage basket, unfasten the zipper.*
Arm Bar
Always secure the child with the harness. The arm bar is
not a restraint device.
3 - Align the arm bar ends with the arm bar mounts, and
insert until it clicks into place. A “click” sound means the
arm bar is assembled completely.
4 - To remove the arm bar, press the arm bar release buttons
(1) and lift the arm bar up. (2)
5 - Fasten the inner snaps of the seat pad to the inside of
the seating area as shown.
Check Set Up
Stroller frame is latched open
Front wheels, brake assembly and rear wheels
securely attached
Canopy mount attached to stroller frame and canopy
zipped to seat pad
Basket is securely attached
Arm bar is securely attached
*On models with basket cover
2
1 4
52
3
16 MIXX instructions 17MIXX instructions
click
1
2
1

Nuna mixx Series Specifications

General

Weight capacity	50 lbs
Suspension	All-wheel suspension
Maximum child weight	50 lbs
Frame material	Aluminum
Harness type	5-point
Car seat compatibility	Nuna PIPA series
Stroller width	23.6"
Folded width	23.6"
Seat facing directions	Parent-facing, World-facing
Compatibility	Nuna PIPA series