Product Use
The parking brake MUST be engaged when the stroller
is stopped and when placing and removing child.
Securing Your Child
Avoid serious injury from falling or sliding out. Always
use the seat belt.
Make sure the harness is adjusted properly and your
child is snugly secured. The space between the child
and the shoulder harness should be about the thickness
of one finger. DO NOT cross the shoulder belts. This will
cause pressure on your child’s neck.
1 - Push the center button on the buckle to release the
buckle latch, remove the clips and place your child
in the stroller.
2 - Connect the shoulder buckle and hip buckle.
3 - Secure the shoulder buckle and hip buckle to the buckle
latch and repeat on the opposite side.
4 - Fit the harness snugly to your child by sliding the lower
adjustment buckles (located under the harness covers)
up (1). Then pull the waist adjustment straps out (2).
Shoulder Harness Position
5 - The upper shoulder harness buckles can be moved up
and down for added adjustment.
1
3
4
5
2
18 MIXX instructions 19MIXX instructions
1 1
2
2
To Next Page
Loading...
Need help?
General
