EasyManuals Logo

Nuna PIPA rx User Manual

Nuna PIPA rx
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
6 PIPA rx instructions 7PIPA rx instructions
Child Usage
Requirements
This child restraint is suitable for
use with children who meet the
following requirements:
Weight: 4 to 32 lb (2 to 14.5 kg)
Height: less than 32 inches (81 cm)
It is recommended to keep your
child rear facing as long as possible,
until at least 2 years old.
WARNING
DEATH OR SERIOUS INJURY
can occur if you fail to follow
the warnings, instructions and
labels on the child restraint.
A child’s safety is your
responsibility. NEVER leave
your child unattended.
Read all instructions before
use of this child restraint
or installation in a vehicle.
In addition, read the
vehicle owner’s manual for
information on child restraint
installation.
Use the bottom of the base for
instruction manual storage.
Register your child restraint
with the manufacturer.
Secure this child restraint with
the vehicle’s child restraint
anchorage system if available,
or with a vehicle belt.
This child restraint can ONLY
be used in a rear facing
position when using in a
vehicle. The child restraint
cannot be properly secured in
a forward facing position, and
will be unsafe. Use only with
children who weigh between 4
and 32 pounds (2 and 14.5 kg)
and whose height is 32 inches
(81 cm) or less. Exceeding
these height and weight limits
is unsafe.
Cover the child restraint
when your vehicle is parked
in sunlight. Parts of a child
restraint can become very hot
if left in the sun, and can burn
a child’s skin. Check for hot
parts before putting your child
in the child restraint.
NEVER use a car seat that has
been involved in a moderate
to severe crash. See page 11
to learn what is classified as a
moderate to severe crash.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nuna PIPA rx and is the answer not in the manual?

Nuna PIPA rx Specifications

General IconGeneral
Product TypeInfant Car Seat
Weight Capacity4 to 32 lbs
Height CapacityUp to 32 inches
CanopyUPF 50+ canopy with flip out eyeshade
Harness5-point harness
Base CompatibilityPIPA series base
Safety FeaturesSide impact protection
Safety StandardsFMVSS 213
CompatibilityNuna strollers with adapters
InstallationBelt path or with base using True lock™ base installation
Weight of Car Seat7.6 lbs (without base)

Related product manuals