Nuna PIPA rx User Manual

Installation in an Aircraft
Position child restraint so that child
is facing the aircraft seat back.
1 - Route the aircraft lap belt under
both lap belt guides and buckle.
2 - Adjust the angle of the child
restraint. A rolled up towel or
blanket may be used to help
adjust the amount of recline (1).
The angle is correct when the
blue line is level with the floor
of the aircraft (2).
Tighten the aircraft belt while
pushing the child restraint firmly
into the seat.
When installing in an airplane using
a base, follow the instructions for
vehicle installation with a base
using lap belt only (p.48).
This child restraint is certified for
use in commercial aircraft with or
without the base. Be sure to contact
your airline prior to travel to discuss
their use policy.
Installation on a Stroller
This infant carrier can attach to
Nuna strollers as well as other
brands of strollers using adapters
(see next page). Adapters are sold
separately. Visit nunababy.com for
more information.
62 63PIPA rx instructions PIPA rx instructions
1
2
1
2

Nuna PIPA rx Specifications

General

Product Type	Infant Car Seat
Weight Capacity	4 to 32 lbs
Height Capacity	Up to 32 inches
Canopy	UPF 50+ canopy with flip out eyeshade
Harness	5-point harness
Base Compatibility	PIPA series base
Safety Features	Side impact protection
Safety Standards	FMVSS 213
Compatibility	Nuna strollers with adapters
Installation	Belt path or with base using True lock™ base installation
Weight of Car Seat	7.6 lbs (without base)