Nuna PIPA rx User Manual

Product Use
1 - Top of child’s head is at least 1”
below top of child restraint.
Securing Child in
Child Restraint
2
- Loosen harness by pressing on
adjustment button while pulling
on the harness straps.
3 - Press button to release the
halves of the chest clip. (1)
Separate chest clip and spread
harness straps apart. (2) Press
buckle button. (3)
4 - Place child in child restraint in
seated position.
5 - The child should be seated
against both the back and
bottom of the seat with no gap
behind the child. Do not allow
child to slouch.
Gently guide child’s arms
through harness loops.
6 - Insert buckle tongues into
buckle.
(continued on the next page)
1
3
2
2
1
2
3
4
5
6
33PIPA rx instructions32 PIPA rx instructions
1 inch
(25 mm)

Nuna PIPA rx Specifications

General

Product Type	Infant Car Seat
Weight Capacity	4 to 32 lbs
Height Capacity	Up to 32 inches
Canopy	UPF 50+ canopy with flip out eyeshade
Harness	5-point harness
Base Compatibility	PIPA series base
Safety Features	Side impact protection
Safety Standards	FMVSS 213
Compatibility	Nuna strollers with adapters
Installation	Belt path or with base using True lock™ base installation
Weight of Car Seat	7.6 lbs (without base)