Nuna revv User Manual

Adjustable Harness Buckle
1 - The harness buckle may be adjusted for improved comfort or fit of any child. Loosen
harness, open the chest clip and harness buckle. Lift up on the lower section of the head
support pad (1).
2 - Locate and undo 2 snap buttons on the seat back pad.
3 - Remove the harness buckle from the seat pad, and pull forward on the seat back pad.
4 - Locate the harness buckle adjustment slots in the seat shell and squeeze/pinch the
sides of the harness buckle strap together. Drop the pinched strap slightly to allow it to
pass between the positions.
5 - Slide the harness buckle strap forward or rearward (as shown) to best fit your child.
6 - Insert the harness buckle back into the correct seat pad opening. Reattach both seat
back pad snap buttons, and pull down on the lower section of the head support pad.
The infant insert (p.26) is recommended for use with infants who weigh between 5–11 lb
(2.3–5 kg). DO NOT use the insert for a child who weighs more than 11 lb.
Use the position that is closest to (but not under) your child.
1
4
2
5
3
6
24 REVV
™
instructions
25REVV
™
instructions

Nuna revv Specifications

General

Weight capacity	5 to 40 lbs (rear-facing); 25 to 40 lbs (forward-facing)
Orientation	Rear-facing and forward-facing
Recline positions	Multiple recline positions
Harness type	5-point harness
Type	Convertible car seat
Height Limit (Rear-Facing)	Up to 43 inches
Height Limit (Forward-Facing)	Up to 43 inches
Safety features	Energy-absorbing foam, side impact protection
Usage	Infant to toddler