4 Connect the other end of the pipe to the water
mains.
3 Connect one end of the pipe to the 3/4” inlet on the
back of the machine.
The water hardness must be less then 4° - 6° fr
(french degree).
Otherwise the conditions of guarantee of the
machine will expire.
The machine must be installed according
to the local standards in force with regard
to plumbing systems. For this reason, the
plumbing connections must be carried
out by a qualified technician.
1 Remove the cap to access the granulated coffee
bean container.
WARNING
4.3 FILLING THE COFFEE
CONTAINER
2 Don’t fill to the brim but pour just enough toasted
coffee beans into the coffee bean holder to
ensure correct closure of the unit.
3 Close the cap.
Pour ONLY toasted coffee beans into the coffee
bean holder. any other kind of coffee, for example
ground coffee, will damage the coffee grinder.
Don’t insert caramelized, sugar coated, or simi-
larly coated coffee beans, or instant coffee or
other sugary beverages because they will harm
the appliance.
4.2 MACHINE
INSTALLATION
(VERSION FOR DIRECT
CONNECTION)
Once the machine has been withdrawn from the
packaging, carry out the following instructions:
1 Position the unit on a horizontal surface.
2 Remove the pipe with 3/4” coupling from the
hatch in the top of the machine.
The water hardness must be less then 4° - 6° fr
(french degree).
Otherwise the conditions of guarantee of the
machine will expire.
WARNING
WARNING
To Next Page
Loading...
