Nuova Simonelli MicroBar - Cleaning the Steam Nozzle; Cleaning Drop Collector Grid; Cleaning Water Collecting Tray; Cleaning the Water Tank

62
ENGLISH
CAUTION
RISK OF BURNS OR SCALDING
If cleaned when the nozzle is still hot, avoid
touching it with bare hands.
Use a cloth dipped in hot water and/or a neutral
cleanser.
• Wash the grid clean with a brush and hot
water and soap.
• Clean the water collecting tray with hot
water and soap, if necessary using a brush.
NOTE: The water collecting tray can be
washed in the dishwasher.
CAUTION
Never use any sort of solvent.
• Clean the water tank with hot water and
soap, if necessary using a swab
• Use a small brush to clean any deposits or
coffee residues off the piston and the deliv-
ery unit site or any other areas soiled with
coffee.
9.5 CLEANING THE
STEAM NOZZLE
9.6 CLEANING THE DROP
COLLECTING TRAY
GRID
9.7 CLEANING THE WATER
COLLECTING TRAY
9.8 CLEANING THE WATER
TANK
9.9 CLEANING THE GAS-
KET
Fig. 41
NOTE:rinse carefully so that undesirable
residues aren’t deposited on the bottom
of the tank.
Fig. 44
Fig. 45
Fig. 42
Fig. 43
Clean the steam nozzle each time it is used to
warm up drinks.
CAUTION
Switch off the machine before filling or
removing the tank.
NOTE:Follow the instructions applied on the
label on the inside of the front door too.
• Set the machine to the “O” energy level.
Fig. 46
9.10 CLEANING THE MILK
FOAMER