Nuova Simonelli TALENTO - Page 51

49
EN
Press the beverage key to read the number of bever-
ages poured, e.g.:
Press and hold down ENTER
for 6 seconds
to reset the counter.
Press RESET
to quit the counter for the
selected beverage; press RESET
again for
3 seconds to quit the sub menu.
2.2 DRINK TOTAL (Total beverages)
Press ENTER to enter the sub menu; all of
the beverage keys (1-10) will start to flash. Press
the beverage key to read the number of beverages
poured, e.g.:
Press and hold down ENTER
for 6 seconds
to reset the counter.
Press RESET
to quit the sub menu.
2.3 COUNT CYCLE (Cycle counter)
Press ENTER to enter the sub menu; all of
the beverage keys (1-10) will start to flash. Press
the beverage key to read the number of beverages
poured, e.g.:
COUNT CYCLE
BUTTON 2
DX. 000020
SX. 000030
The cycles refer to single beverages; press 2X
to read the number of cycles for double
beverages.
Press and hold down ENTER
for 6 seconds
to reset the counter.
Press RESET
to quit the counter for the
selected beverage; press RESET
again for
3 seconds to quit the sub menu.
2.4 TOT CYCLES (Total Cycles)
Press ENTER to enter the sub menu; the
keys remain lit and the display will read:
The number of cycles is the sum of all beverages,
single and double.
Press and hold down ENTER
for 10 seconds
to read the absolute total (not resettable to zero):
Press and hold down ENTER
ENTER for 6
seconds from the total absolute menu to reset the
TOT CYCLES counter.
Press RESET
to quit the submenu.
2.5 TOT GRIND R
(Right hand grinder total)
Press ENTER to enter the sub menu; the
keys remain lit and the display will read:
Press and hold down ENTER
for 10 seconds
to read the absolute total (not resettable to zero):
TOTGRIND R
ABSOLUTE TOT
H : MIN
000000:63
Press and hold down ENTER for 6 seconds
from the total absolute menu to reset the TOT GRIND
R counter.
Press RESET
to quit the submenu.
DRINK COUNT
COFFEE
DX 000024
SX 000036
TOT CYCLES
N. 0002563
TOT CYCLES
ABSOLUTE TOT
N. 0006500
TOT GRIND R
H : MIN
000000:63
DRINK TOTAL
N. 000060