What to do if the water tank is empty in my Nuova Simonelli PRONTOBAR TOUCH?
If the water tank of your Nuova Simonelli Coffee Maker is empty, turn off the machine, remove the tank, and fill it with fresh water.
What to do if the drawer is full in my Nuova Simonelli Coffee Maker?
If the drawer of your Nuova Simonelli Coffee Maker is full, remove and empty it.
How to fix a drawer that is out of place in my Nuova Simonelli PRONTOBAR TOUCH Coffee Maker?
If the drawer of your Nuova Simonelli Coffee Maker is out of place, insert the drawer properly.
What to do if the front panel is open on my Nuova Simonelli PRONTOBAR TOUCH?
If the front panel of your Nuova Simonelli Coffee Maker is open, close it properly.
What to do if the group boiler does not reach the set temperature in my Nuova Simonelli Coffee Maker?
If the group boiler of your Nuova Simonelli Coffee Maker does not reach the set temperature, switch the machine off and on again and call the Customer Service.
What to do if the steam boiler does not reach the set temperature in my Nuova Simonelli PRONTOBAR TOUCH Coffee Maker?
If the steam boiler of your Nuova Simonelli Coffee Maker does not reach the set temperature, switch the machine off and on again and call the Customer Service.
What to do if the coffee boiler does not reach the set temperature in my Nuova Simonelli PRONTOBAR TOUCH?
If the coffee boiler of your Nuova Simonelli Coffee Maker does not reach the set temperature, switch the machine off and on again and call the Customer Service.
General| Type | Automatic Coffee Machine |
|---|---|
| Display | Touchscreen |
| Number of Groups | 1 |
| Grinder | Yes |
| Bean Hopper Capacity | 1.2 kg |
| Voltage | 220-240 V |
| Boiler Material | Stainless Steel |
| One-Touch Functions | Yes |
| Pump Pressure | 15 bar |
| Frequency | 50/60 Hz |
| Water Tank Capacity | 2.5 L |
Key safety precautions for installation, use, and maintenance.
Requirements for the physical location and surface for machine placement.
Guidelines for placing the machine for optimal ventilation and stability.
Procedures for connecting the machine to water supply and power.
Step-by-step instructions for powering the machine on and off.
How to select and dispense various types of coffee and other beverages.
Navigating and interacting with the machine's touch screen interface.
Adjusting parameters for drinks and managing recipes.
Regular tasks for cleaning the work area and machine exterior.
Performing automated cleaning routines for the dispensing group.
Detailed instructions for cleaning specific parts like the milk foamer and coffee group.
Identifying and understanding common error codes and their causes.
Recommended solutions for specific machine malfunctions and fault conditions.
Key specifications including dimensions, power, and capacities.
Schematic representation of the machine's electrical system and components.
To Next Page