40
NOTE: The nozzles can be adjusted to fit all
kinds of cups.
Position the nozzles carefully in such a way as
to limit the space between cup and nozzles.
• Position one cup under each nozzle.
• Press the desired coffee delivery key once.
• The coffee is being made.
The procedure for making espresso and
long espresso is the same.
• Position a cup under the nozzles.
The beverages always flow from both nozz-
les.
• Press the desired coffee delivery key once.
• The coffee is being made.
• According to the kind of coffee selected the
display will read.
Leave the cup beneath the nozzles until the
messages on the display disappear.
Fig. 21
Fig. 23
Fig. 24
Set the desired function on keyboard keys n. 1-
2-3-4-6 (see 'DISPLAY' chapter), by following
the programming procedures (see Chapter on
Programming).
Keys 1-2 can correspond only to coffee beve-
rages; keys 2-4-6 can correspond to all bevera-
ges.
Then apply the corresponding label supplied.
Fig. 22
LEGENDA
(Selection configurations)
Cappuccino
Big Cappuccino
Macchiato
Latte
1 Ristretto
2 Ristretto
1 Cafe Creme
2 Cafe Creme
6.2 SELECTIONS
CONFIGURATION
6.3 HOW TO MAKE THE
COFFEE’
6.4
HOW TO MAKE TWO
COFFEES
ENGLISH
To Next Page
Loading...
