Nuova MICROBAR - PROGRAMMING CYCLE

44
1. CUMULATIVE TOTAL
The submenus can be entered by pus-
hing the ENTER key.
The quantity of doses delivered for each
kind of beverage will be displayed.
1Total Ristretto
2Total 2 Ristretto
3Total Espresso
4Total 2 Espresso
5Total Cafee
6Total 2 Cafee
7Total Cafecream
8Total Latte
9Total Caffelatte
10 Total Macchiato
11 Total Cappuccino
12 Total Big Cappuccino
13 Total Deca
14 Total Cleaning
15 Total Litres
The arrow keys ▲▼ scroll all the totals of the
various beverages.
The RESET key moves back to the preceding
menu.
Per azzerare i conteggi, premere contempora-
neamente i tasti ▲▼.
The display will read “Counters reset”.
To exit programming sites, proceed as follows:
NOTE: can be performed with machine on and
from any of the visualized functions.
• Insert the key into the appropriate lock.
•Turn the control panel hatch key counter-
clockwise.
• Open the control panel hatch; the display
will read:
• Close the front panel and turn the key clock-
wise. The display will read:
• The unit will enter resting phase position
and the display will read:
• The machine is now ready to deliver the
desired beverages with its new memorized
setting. Alternatively scroll all the functions
by pushing the arrow keys ▼ until the dis-
play reads:
2. PRODUCT NAME:
By pressing the ENTER key, the subme-
nus can be accessed.
A beverage is assigned to each key.
Example:
In this case the beverage ‘Espresso’ is assi-
gned to key number.
The arrow keys ▲▼ scroll the names of the
beverages on each key available in the agenda.
The RESET key is for exiting the submenu.
The ENTER key confirms the type of beverage
for the key number being taken into considera-
tion, and then passes on to the beverage of the
next key.
The programmable keys are the following:
Once the programming of the final key has
been completed, you pass on to the next menu
item.
NOTA: The keys
can be programmed for both milk-
based and coffee drinks.
The keys
can be programmed exclusively for cof-
fee drinks.
1 32 4 6
2 64
1 3
7.3 EXITING
PROGRAMMING
7.4 PROGRAMMING CYCLE
1
ENGLISH