Assembling Your Veggie Bullet | 2322 | Assembling Your Veggie Bullet
S TE P 5:
To securely close the SHOOTER
LID (1D), hook the front safety
clasp over the LID and press down
to LOCK. The POWER INDICATOR
LIGHT will glow RED when all
pieces are locked and in place.
Press the Power Button to turn
the machine ON. The Button will
glow GREEN and the motor will
run. If the Button doesn't glow
GREEN (if not glowing at all,
assembly is incorrect), turn o
power and check your assembly
to make sure all pieces are locked
and in place.
To UNLOCK and open the
SHOOTER LID (1D), first press
the Power Button to turn OFF the
machine. The POWER INDICATOR
LIGHT will glow RED when the
unit is o . Then, pull the bottom
arm of the safety clasp outward to
unhook and simply li lid to open.
STEP 1:
Place the SPIRALIZER BASE
attachment (2A) on POWER
BASE by aligning the LOCK /
UNLOCK arrow at the bottom
with the UNLOCK icon on POWER
BASE, and then turn clockwise to
click into LOCK position.
To UNLOCK and remove
SPIRALIZER BASE attachment
(2A) from POWER BASE, simply
turn counter-clockwise toward
the UNLOCK icon and li .
B. SPIRALIZER ASSEMBLY (2)
SAFETY NOTE: Please make sure Veggie Bullet is
powered OFF before assembling or disassembling.
The SPIRILIZER LID is the one with the feeder chute centered
in the middle of the lid. The lids are not interchangeable.
To Next Page
Loading...
