10
MAINTENANCE CLEANING DURING THE DAY. If you are using the juicer intermittently, pulp
residue may collect and dry on the basket. This may cause vibration during use. To prevent this vibration,
remove the basket after more than one half-hour of idle time, and rinse it under hot water. Before
reassembling, make sure all holes are free of any pulp residue.
PROPER CARE OF YOUR BASKET IS ESSENTIAL. Your basket is engineered to provide the finest juice
possible. It is constructed with very fine stainless steel, and has been precisely balanced to provide vibration-
free operation. Proper cleaning and handling are necessary to ensure the best possible operation of your
juicer.
LATCH ADJUSTMENT. The threaded latches on your machine may need future adjustment. The latches
should require some pressure when putting the lid on the machine. You should hear an audible SNAP when
properly adjusted. To adjust the latch tension, follow these steps:
1. Loosen the hex head nut (7/16” wrench) on the threaded part of the latch several turns.
2. To tighten the latch, turn the hook part of the latch clockwise.
3. To loosen the latch, turn the hook part of the latch counter-clockwise.
4. Check the tension. Re-adjust, if necessary.
5. Retighten the hex head nut.
THE 16 BLADE CUTTER PLATE CAN BE RESHARPENED. The cutter plate in your juicer is designed
to be resharpened. The 16 cutting blades on the cutter plate should be resharpened when dull. Nutrifaster
offers a sharpening service and recommends that the cutter plate be resharpened every 2-4 months under
regular use. Please feel free to call Nutrifaster if you have any questions about when to have your cutter
plate sharpened.
To Next Page
Loading...
Need help?
General