The window turns back to stand-by position if you wait for 15 seconds or press “F4” key that
corresponds to “EXIT” expression.
Water is insufficient: If the water level inside the reserve tank is at minimum level “!”
warning appears beside the humidity value. In this case, press “F4” key that corresponds to
“HELP” expression to see the explanation of the error.
WATER IS
UNSUFFICIENT
ADD DISTILLED
WATER
EXIT
The window turns back to stand-by position if you wait for 15 seconds or press “F4” key that
corresponds to “EXIT” expression.
Water tank is full: If the water level of the water tank reaches to its maximum level, this
warning appears. In this case you press “F4” key that corresponds to “HELP” expression to
see the explanation of the error. If you see this warning, stop the water filling.
WATER TANK
FULL
HUMIDITY OFF
EXIT
The window turns back to stand-by position if you wait for 15 seconds or press “F4” key that
corresponds to “EXIT” expression.
PLEASE CALL AN AUTHORISED NUVE SERVICE FOR THE ERRORS
21
To Next Page
Loading...
