THE NUVINCI
®
HARMONY
™
H
|
SYNC
™
SYSTEM
5
EN
Recalibrating Harmony H|Sync
If system operation is inconsistent or incorrect, your Harmony H|Sync
system may need to be recalibrated.
To do this:
Turn system power on
Pedal the bicycle lightly through the entire calibration procedure
(preferably on a stand with the rear wheel off the ground):
Initiate your eBike Harmony H|Sync calibration (reference your
eBike system manual for Harmony H|Sync calibration instructions)
Continue pedaling lightly while the system shifts from “low” to
“high” ratio multiple times and completes calibration.
Troubleshooting
Contact your dealer if there are questions as to how the Harmony
H|Sync system operates for your bicycle.
Please visit our website for up-to-date product and troubleshooting
information: www.nuvinci.com/hsync
To Next Page
Loading...
