Need help?Do you have a question about the NuVinci Nfinity 330 and is the answer not in the manual?
Guides on adjusting cable slack using barrel adjusters and checking for the ideal slack of 0.5mm.
Details the procedure for installing the correct 9-spline 3/32 inch sprocket onto the NuVinci CVP.
Explains compatibility and orientation for Nfinity Hub Interfaces with specific CVP models (N330, N360/N380).
Guides on the correct installation of the Nfinity Hub Interface onto the CVP axle, ensuring proper alignment.
Details the steps for mounting the NuVinci shifter onto the bicycle handlebars, ensuring visibility and unobstructed operation.
Provides instructions for passing and securing shift cables and associated hardware to the shifter and hub interface.
Explains how to reset the NuVinci Optimized CVP to full overdrive if the hub interface was installed incorrectly.
General| Model | Nfinity 330 |
|---|---|
| Category | Bicycle Accessories |
| Gear Ratio Range | 330% |
| Installation | Professional installation recommended |
| Warranty | 2 years |
| Intended Use | Urban |
| Compatibility | Standard bicycle frames |
| Type | Continuously Variable Transmission (CVT) |
To Next Page
