Need help?Do you have a question about the NuVinci N360 and is the answer not in the manual?
Controlling the ratio is done by rotating the shifter grip. The display shows ratio with a simple graphic.
Ratio changes occur smoothly within the hub. It is compatible with various brakes and has an integrated freewheel.
Requires a qualified mechanic. Max spoke diameter is #13/2.34mm. Suggested lacing is 2-cross.
Install a 3/32 inch sprocket and spacer, then secure with a snap ring. Use only 3/32 inch chains.
Place rear wheel into frame, slide no-turn washers onto axle ends. Mount axle nuts and torque to 30-40 Nm.
Shift to allow access to cable hardware. Remove hardware, axle nuts, and no-turn washers. Remove wheel.
Cable slack adjusted with barrel adjusters at shifter. Ideal slack is 0.5mm; over 2.0mm degrades performance.
Components are sealed. Do not use water under pressure. Clean frequently during winter season.
CVP is permanently lubricated. Internal freewheel is serviceable. Regular chain lubrication extends chain life.
Remove cable hardware, extract cable anchors and cables from grip pulley. Install new cables and reassemble.
If hub interface is incorrectly installed, full ratio range may be unavailable. Resetting is necessary.
Lists hub colors, spoke configurations, brake configurations, ratio range, shifting, dropout width, axle length and threads.
Details installation procedures for roller, rim, and disc brake configurations, including torque values.
Legal notice regarding patents, trademarks, and usage terms for NuVinci components.
Covers repair, replacement, or refund for defective NuVinci CVP and shifter for two years.
Details exclusions such as improper installation, misuse, modification, wear and tear, and third-party parts.
Explains how to claim warranty service through a dealer and provides contact information for support.
General| Gear Range | 360% |
|---|---|
| Gear Ratio Range | 0.5 - 1.8 |
| Type | Continuously Variable Transmission Hub |
| Weight | 2.45 kg |
| Compatibility | Bicycles with rear hub spacing of 135mm |
| Intended Use | Urban, touring, e-bikes |
| Material | Aluminum |
| Installation | Professional installation recommended |
To Next Page
