NuVinci Harmony H|Sync

Need help?

Do you have a question about the NuVinci Harmony H|Sync and is the answer not in the manual?

Summary

Harmony 330 Operation and Care

Harmony 330 System Description

Details the Harmony 330 system's compatibility and operation with the H3 controller.

Calibrating the Harmony 330 System

Step-by-step instructions for calibrating the Harmony 330 system.

Harmony 380;380 SE Operation and Care

Harmony 380;380 SE System Description

Describes the Harmony 380/380SE system with H8 controller and modes.

Calibrating the Harmony 380;380 SE System

Procedure for calibrating the Harmony 380/380SE system.

Harmony H|SYNC Operation and Care

Harmony H|Sync System Description

Explains the Harmony H|Sync system's integration with eBike control systems.

General Calibration for Harmony H|Sync

General calibration steps for the Harmony H|Sync system.

Bosch Intuvia Calibration for H|Sync

Specific calibration steps for Harmony H|Sync with Bosch Intuvia.

Harmony General Care and Maintenance

Disconnecting the Rear Wheel

Fitting the Rear Wheel

Harmony Component Assembly

Wheelbuilding Procedures

Details regarding spoke tension, diameter, and lacing patterns.

Installing the Sprocket

Instructions for installing the correct sprocket onto the CVP.

Installing the Input Speed Ring

Guide for installing the input speed ring for belt-compatible systems.

Installing the Output Speed Ring

Installing the Hub Encoder

Hub Interface Compatibility and Orientation

Installing the Harmony Hub Interface

Installing the Harmony H8 Controller

Installing the Harmony H3 Controller

Harmony Service Instructions

Servicing or Replacing Freewheel

Procedure for servicing or replacing the freewheel.

Removing Brake Configurations

Installing Brake Configurations