20 | nuwavenow.com
TROUBLESHOOTING GUIDE
Error Message: Solution(s):
Add Probe Probe not connected to the unit. Plug the Probe into the Bravo.
Replace Probe The Probe circuit has short-circuited. Contact Customer Service
Error 1
The Probe temperature hasn’t changed for 60 minutes. Ensure the
Bravo XL Pro is cooking.
Error 2
The Bravo XL Pro’s cooking temperature is lower than the Probe
target temperature.
Error 3
NTC Temperature Sensor overheated. Turn unit off to cool. If the
Bravo is not working after it cools down, contact Customer Service.
Error 4 NTC Temperature Sensor short circuit. Contact Customer Service.
Error 5 NTC Temperature Sensor is open. Contact Customer Service.
Key Struck A button may be jammed. Contact Customer Service.
NOTES
For further assistance, please contact NuWave’s Customer Service Department
For Amazon Purchases: support@nuwavenow.com
For All Other Purchases: help@nuwavenow.com
To Next Page